The days are gone that people empty their pool one bucket after the other. Even if you don’t have a pump for your pool, or it broke, you can still drain water from your pool using a garden hose. The water from the outer spigot helps the siphon process.
To make the siphon process work, you must ensure the drainage area from where the water goes out of the hose is lower than the pipe bringing water out of the puddle. A drain-off won’t happen coursing uphill. It only happens for both above-ground and in-ground puddles.
Evidently, a pool ridden with debris, algae, or dirt is a sorry sight for any home dweller. And if recruiting a pool cleaner turns out to be costly, your circumstances may appear hopeless.
Usually, you may end up thinking about draining the pool. With this in sight, having a garden hose will do you much good. But having a garden hose is one thing. Knowing how to drain a pool with a garden hose is another ballgame entirely. Here, we are going to look at the artless steps you can follow to drain your pool making use of a garden hose.
Step 1 – Get the perfect pipe size
Would you just pick any hose you find littering around? Oh! You won’t. In practice, you’ll find professional pool cleaners tell you that among the things you’ll need is a ¾ inch hose pipe of such length that would help you connect from your puddle to the drainage.
It will take a long time for a thin pipe to drain off the water from the pool. You must choose a garden hose that is so long that it can bury a particular end in the puddle while the other extreme is joined to an outer spigot.
Step 2 – Choose your water disposal technique
Although the excess or recycled water demands the appropriate drainage to avoid overflowing in your surroundings, offhand drainage can destroy the neighborhood and streets. The water can be polluted with so much filth that makes it a health menace to your neighbors. So, what options are open to drain off excess water? These are your sewer system or house drainage.
Dumping a great quantity of water may adjust the scenery of your surroundings. So, it’s necessary you think about where you want the water to go. Some states and local communities have laws regulating the removal of glut waters into the open space as they pose so much risk to the environment.
Step 3 – Join the Pipe’s end to the faucet
Here, you can join an end of the pipe to the spigot. After, you can go on to put the other end of the pipe in the water pool. At this point, you will be leaving that end of the hose totally underwater.
Step 4 – Siphoning and Drainage
This is where the core of knowing how to drain a pool with a garden hose comes to play. After choosing where to let off the excess water, you should decide which method you want to take to siphon the water.
You may like to begin by simply cutting off an area of the garden hose on each end. Another option is to syndicate the usage of the garden hose using the spigot. As you cut the garden hose, the proper thing is to create an eight-foot section for it.
Let the faucet be turned on to accommodate chock full wade of water instead of just a trickling such that it travels through the garden hose seamlessly. After that, you can turn off the water for thirty seconds or thereabout the moment you observe water coursing through the waterlogged area of the hose. This should indicate to you that the hose is filled with water.
At this stage, you can take away the hose from the spigot Immediately and bend the hose close to the end earlier attached to the spigot. The bend helps in retaining the water within the hose – it’s just like putting your thumb around a particular end of some straw even as the straw carries fluid.
Pointing the capped rear into the trench, take away the cap, and within the twinkling of an eye, the water begins to siphon away onto the drainage. In the process, ensure you leave space in-between the hose’s end and the walls of the drainage so that the water from the sewer does not flow back to the pool. This helps to check the pool’s contamination with murky waters.
After all, you may transfer the kinked extreme of the pipe to the drainage area. At the same time, you’ll be plotting the end of the hose at an upper level of the water present in the puddle or pool as you stroll.
Step 5 – Dry the pool.
Drying will help avert leaving the pool full of algae. Drying the pool helps to remove the chances of algae forming in the trench.
One of the cheapest means (if not the cheapest) to draining your pool is to use a garden hose. But, it’s often slow and does not drain up entirely. Still, if you like to treat the chemicals available in your pool, then using a garden hose is an option you should consider.
Most times, you may need to siphon surplus water from the pool. When you have a garden hose in hand, it becomes convenient, seamless, with little to no cost needed. Knowing how to drain a pool with a garden hose should not be like looking for a needle in a haystack. By following the steps laid out in this informative guide, you should know that, right?
You can go about this process as many times as feasible if your situation so requires it. What’s more, if your pool demands an exhaustive drainage, then you might have to consider taking advantage of a pump. By following the above-mentioned spelt-out steps, you’ll be set for a warm summer.